丙酮肟酸催化水解制备羟胺的研究

以固体酸为催化剂,考察了不同固体酸对丙酮肟的催化效果,优化选出了催化效率最佳的固体酸(氨基磺酸)。进一步考察了氨基磺酸的用量、反应温度及反应时间对丙酮肟水解的影响。结果表明,当氨基磺酸与丙酮肟的摩尔比为0.75∶1时,反应温度为室温25℃,反应1 h,加水量为30~50 m L时,丙酮肟的转化率在40%以上,丙酮的选择性大于93%,羟胺的选择性达到95%。     

废植物油脂与废聚乙烯塑料共裂解制备燃油研究

研究在高压反应釜中,利用Zr O2/Al2O3/Ti O2多晶泡沫陶瓷催化剂,催化废植物油脂与废聚乙烯塑料共裂解制备燃油。考察了温度、时间、催化剂添加比例、物料质量比等因素对废植物油脂与废聚乙烯塑料共裂解制备燃油的影响。得到适宜的制备条件为反应温度430℃、反应时间40 min、催化剂质量分数15%、物料质量比1∶1,在此条件下,液体产物产率为65.9%。GC-MS分析表明,裂解液体中饱和烃类产物峰面积比例接近100%,其中97.85%为直链烷烃,并初步推断了废植物油脂与废聚乙烯塑料共裂解机理。产物的部分燃料油性能测定结果表明,裂解燃油热值明显高于生物柴油与0号柴油,密度和运动黏度符合0号柴油的标准,冷凝点和冷滤点均优于生物柴油,低温流动性好。     

Formation of carbon–carbon composite using wood as a precursor

Abstract

The use of wood as structure-giving material may be an effective approach to reduce some barriers for producing high temperature ceramic especially carbon composites. The objective of this study was to develop a simple process for producing carbon–carbon (C–C) composite through porous template result from pyrolysing of wood. Walnut, known to be relatively permeable, was being heat treated under controlled atmosphere. The carbon-template formed was infiltrated with coal tar pitch. Morphological characterization of the resulting composite was carried out by scanning electron microscopy morphology and physical properties of sample were evaluated with determination of bulk density and open porosity. In addition mechanical properties of products were analysed with three-point bending test and Vickers micro hardness. Results showed that bulk density had an uprising trend with increasing the number of densification cycles and subsequently open porosity decreased. Moreover, from mechanical property's point of view, results had a good compatibility with increase in the densification cycles.     

An experiment study of the realization of diesel engine emission standard of Euro IV

This paper calibrates the advanced injector angle and EGR of a four-in-line pressure engine on the specialized test stand, which makes the NOx achieved the standard of Euro IV. Then an experiment study of the diesel oxidation catalyst (DOC) and the particulate oxidation catalyst (POC) are made. Both make the diesel engine emission achieving the Standard of Euro IV. This experiment study shows a kind of method that realizing diesel engine emission standard of Euro IV, and concludes the character and law of the method.     

玉米秸秆牺牲剂对TiO2/Pt/生物炭光催化水制氢性能的影响

采用光沉积法、水热合成法制备出TiO2/Pt/生物炭复合光催化剂,以玉米秸秆悬浮液作为牺牲剂,考察了不同质量分数玉米秸秆对光催化分解水制氢性能的影响。通过X射线衍射（X-ray Diffraction,XRD）、扫描电子显微镜（Scanning Electron Microscopy,SEM）、透射电子显微镜（Transmission Electron Microscopy,TEM）、X射线光电子能谱（X-ray Photoelectron Spectroscopy,XPS）和紫外可见漫反射光谱（UV-Visible diffuse reflectance spectra,UV-Vis DRS）等表征手段进一步论证了复合催化剂结构特征。结果表明,随着玉米秸秆质量分数的增大,光催化体系的制氢量展现出先增大后降低的变化趋势。当玉米秸秆质量分数为30%时,TiO2/Pt/生物炭复合材料制氢性能最佳,制氢速率达到225 μmol/(g·h),是单纯TiO2/Pt的11.2倍。其原因在于玉米秸秆分子组成中含有大量的醛基自由基,在光催化过程中被激发,与空穴发生氧化反应,提高了光催化制氢效率。此外,TiO2/Pt/生物炭光催化制经过5次重复利用后,制氢量仍为900 μmol/g,具有较高的光稳定性。     

低温等离子体耦合Fe2O3催化剂去除粮食仓储环境中磷化氢

为了探究低温等离子体（Non-Thermal Plasma,NTP）耦合催化剂对粮仓中磷化氢（PH3）的去除效果,该文采用介质阻挡放电低温等离子体与催化剂耦合的反应装置,研究了NTP与Fe2O3催化剂耦合对PH3去除率的影响,并对耦合反应后的催化剂进行表征,分析产物及反应机理。结果表明,载体和催化剂与NTP耦合改变了NTP的放电状态,提高了PH3去除率;不同载体负载Fe2O3后,在输入功率超过53 W时,NTP与Fe2O3催化剂耦合对PH3去除率均高于无填充,Fe2O3/Al2O3与NTP耦合效果最好,去除效率达到了100%。耦合前后催化剂的表征结果表明,耦合反应之后,Fe2O3/Al2O3催化剂的比表面积降低了11.23%,Fe3+/(Fe2++Fe3+)含量提高了21.06%,Osur/(Olatt+Osur+Oads)含量减少了2.24%,Fe含量降低了4.69%,P含量增加了4.34倍。产物分析表明耦合后生成的主要产物为磷酸。研究结果表明NTP耦合Fe2O3/Al2O3催化剂具有很好的PH3去除效果,为粮食仓储行业去除磷化氢提供理论依据。     

Nitrate Leaching in Pepper Cultivation with Organic Manure and Supplementary Additions of Mineral Fertilizer

Abstract

Nitrate leaching frequently is attributed to the excessive application of mineral nitrogen fertilizers and also to the organic matter incorporated in the soil. A lysimeter experiment was conducted in a greenhouse to evaluate nitrate leaching and pepper productivity in an organically fertilized substrate (prepared by application of 4 kg · m^?2 horse manure and subsequent solarization) to which three different doses of mineral fertilizers were added at 0 (T1), 157 (T2), and 313 (T3) kg N · ha^?1. The results confirmed the high contribution of organic matter to nitrate leaching, although nitrate losses in T2 and T3 were around 33% and 100% greater than in T1. Furthermore the application of mineral fertilizers (T2 and T3) combined with organic manure led to a decrease in pepper fruit productivity. The use of porous ceramic water samplers for measuring fertilizer leaching is questioned. The results also point to the need for a revaluation of irrigation and N fertilization procedures when organic manure is used in order to improve pepper yield and reduce the contamination of ground water by nitrates.     

Study on Development and Manufacturing Process of Ceramic Products Based on CE

Based on the Concurrent Engineering (CE) idea, we have established the development and manufacturing process model of the ceramic products and its supported environment, through studying the development and manufacturing of ceramic tableware in the ceramic industry. The key technology will be discussed in this paper. The achievements of researching, which has shortened product lead time and improved product quality, have been applied in ceramic enterprise.     

A new method for studying clay soils using unaltered soil blocks

The purpose of this paper is to outline a procedure for soil block extraction, which is highly appropriate for clay soils. The method described here is rapid and cheap and has been used successfully by us in clay soils in southern Spain for the last six years. A wooden box is used to shape the soil block in situ and protect it during its transport from the field to the laboratory. Polyurethane foam was selected as the bonding agent, between the wooden framework and the soil block in order to avoid any possible alterations of the soil. This type of foam is used because it is strong, durable and non-toxic. The polyurethane foam is applied to the soil block as a permanent coating. This technique allows us to extract the clay soil solution in the laboratory.     

碳纳米管掺杂Fe(Ⅱ)-Zn催化剂催化合成生物柴油

以多壁碳纳米管（CNTs）掺杂制备的Fe(Ⅱ)-Zn双金属氰化物（DMC）固体酸催化剂,用其催化菜籽油酯交换反应制备生物柴油,并采用X射线粉末衍射﹑傅里叶红外变换光谱﹑扫描电镜等方法对催化剂结构和性能进行表征。实验发现,添加少量的碳纳米管对催化剂的活性有很大很高,其中添加质量百分数为5%碳纳米管的DMC催化剂活性最高,在醇油摩尔比16∶1,反应温度160℃,催化剂加入量为2 wt%的条件下,反应7 h,脂肪酸甲酯收率达到95.8%（质量百分数）。碳纳米管引入对催化剂的组成没有影响,但使得催化剂更加分散,颗粒度更小,更多的大孔道结构,有利于催化剂和反应物接触,从而提高了催化剂活性。